Panasonic EYC108LR Tough IP™ Li-ion 14.4-Volt, 3.3Ah Cordless 1/2" Hammer Drill and Driver and 1/4" Hex Impact Driver Kit
Construction professionals that drill holes and drive fasteners into wood, metal or concrete plus do repetitive bolt/nut fastening need the versatility of a cordless hammer drill and driver and the adjustable power of an impact driver.
The 14.4-volt EYC108LR Combo Kit packages that versatility into one kit. The EY7940X drill/driver and the EY7546X impact driver stands ready to complete a variety of heavy-duty jobs that electricians, general construction contractors, system installers, heating, water and sanitation technicians can throw at them.
(Click To View Larger)
(Click To View Larger)
(Click To View Larger)
Drill and Driver Versatility
The 14.4-volt EY7940X 1/2" hammer drill and driver excels at the variety of jobs electricians, general construction contractors, system installers, heating, water and sanitation technicians do that involve masonry, metal or wood drilling or fastening. At only 3.96 lbs. with the battery, the cordless hammer drill and driver is easy to use in overhead or far-reaching applications.
At only 7-7/8" long x 9-1/8" tall x 2-3/8" wide, the compact hammer drill and driver delivers 390 in. lbs. of torque and capable of drilling up to 1/2" holes in metal or masonry or up to 1-3/8"-diameter holes in wood. The two-speed transmission produces 70-400 rpm/1,260-7,200 bpm in low speed and 200-1,400 rpm/3,600-25,200 bpm in high speed. The variable speed and reversible tool has the power to efficiently drive M5 machine screws and up to 1/4" diameter wood and self-drilling screws.
Workers can select one of 16 clutch settings, which steps up in 1.8 in. lbs. increments from 8.8 to 39 in. lbs., to match torque to fastener driving needs.
An electric brake stops the heavy-duty keyless chuck immediately when the trigger is released; an LED light illuminates the work area for accurate drilling or fastening.
Impact Driver Power
Professional tradesmen often do a wide variety of highly repetitive fastening jobs, and the 14.4-volt EY7546X 1/4" hex cordless impact driver has the versatility, power and runtime to excel in heavy driving, demanding fastening or exacting finish-assembly applications. The cordless impact driver has variable speed and three power settings that make it handy for heavy-power or fine-control jobs such as HVAC installation, auto repair, deck building, lag bolt or finish fastening and more.
The High/Hard setting is best for heavy driving jobs such as setting lag bolts, tightening large bolts and nuts or driving long screws. In this setting, it delivers 0-2,500 no-load rpm, 1,370 in. lbs. of torque and 0-3,000 ipm. The Medium setting is suited for driving self-tapping screws and conduit clip fasteners, delivering 0-1,400 no-load rpm, 1,150 in. lbs. of torque and 0-2,800 ipm. For delicate fastening jobs that require controlled power and finesse, such as installing hinges on cabinets and fastening wall plates to electrical boxes, the Low/Soft setting delivers 0-1,000 rpm, 355 in.-lbs. of torque and 0-2,000 ipm.
An electric brake stops the 1/4" hex quick-connect bit instantly in all modes; a built-in LED light greatly improves work visibility. Weighing just 3.5 lbs. with battery, the compact impact driver measures just 2-13/32" wide, 9-17/32" tall and 5-5/8" long. A convenient built-in belt hook keeps the tool handy.
High-Tech Components Deliver Speed, Power and Durability
The EY7546X impact driver is powered and controlled by a brushless motor, durable switch and sealed control circuits in the tool body and battery pack. These high-tech and resilient systems deliver top power, speed, runtime and long tool life. Because electronics replace brushes in the tool, the tool creates less heat and uses power much more efficiently than conventional motors found in many cordless tools. That means longer runtimes between charges, cooler operation and longer tool and battery life. Their design also allows them to operate under substantial loads, making it less likely to burn out when used for heavy-duty jobs.
Tough and Long-Lasting Battery Packs
The kit comes with two Panasonic 14.4-volt 3.3Ah LR Li-ion battery packs that are built for heavy use, long runtimes between charges and long cycle life. Unlike manganese-based Li-ion batteries used in many cordless power drills and drivers. Panasonic's exclusive cobalt Li-ion battery technology produces less internal heat buildup that can kill battery packs. The battery packs also feature Panasonic's Solid Solution technology, a proprietary process for dissolving and hardening cobalt and nickel and other key battery components. This unique chemistry dramatically improves battery pack safety, reliability and power output. A special heat-resistant ceramic coating layer separates cells and protects them from heat buildup. The chemistry, battery design and manufacturing process add up to powerful batteries that promise to deliver long running lives.
Battery Packs that are Smart, Too
Sometimes professional users are their own tool's worst enemy, attempting to push them past their design limits. This can lead to irreversible battery or tool damage. That's why Panasonic 3.3Ah LR battery pack cells are independently monitored for even discharge while preventing over-charging and over-discharging. An over-discharge sensor prevents the user from running the cordless drill or driver after it reaches the point where too-low voltage output could damage the battery and the tool. Plus, an internal temperature sensor flashes a warning light if internal temperatures rise, and then cuts off tool power if battery temperature reaches critical levels.
Getting water into the impact driver battery doesn't have to mean it's a goner. Panasonic engineers have added built-in vents in the battery case so water can easily drain out of the battery pack. The battery, which is easy to remove using a simple slide-down release button, charge to 80 percent capacity in 50 minutes and fully charge in 65 minutes with the EY0L81B charger that comes with the kit.
Impact Driver Performance
High/Hard | Medium | Low/Soft | |
|---|---|---|---|
| Max. Torque | 1,330 in.-lbs. (1) | 1,150 in.-lbs. (1) | 230 in.-lbs. (2) |
| Speed at No Load | 0-2,500 rpm | 0-1,400 rpm | 0-1,000 rpm |
| Impact/Min. | 0-3,000 ipm | 0-2,800 ipm | 0-2,000 ipm |
What's In The EYC108LR Hammer Drill and Driver and Hex Impact Driver Kit Box
- 1x - EY7940X 14.4-volt Hammer Drill and Driver with 1/2" metal keyless chuck
- 1x - EY7546X 14.4-volt with 1/4" Impact Driver with hex quick-connect chuck
- 2x - EY9L44B 14.4-volt 3.3Ah Li-ion battery packs
- 1x - EY0L81B Battery charger
- 1x - High impact carrying case
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
Product Features :
- Tool IP56 rated for superior dust and water resistance
- 3.3Ah battery generates 390 inch-pounds of torque, up to 25,200 blows per minute
- Compact and lightweight tools reduce strain during use
- Equipped with 18-stage clutch plus drill position
- LED work light illuminates dark work spaces
Rating : 4.0 out of 5.0
List Price : $479.00
0 komentar:
Posting Komentar